CHANGING TO ANOTHER PAPER SIZE AND
PRINTING WHEN PAPER RUNS OUT
Overview
If printing stops because the machine ran out of paper, or if the size of paper specified
in the printer driver is not loaded in the machine, a message will appear in the touch
panel.
Printing will begin automatically when paper is loaded in the machine. If paper of the
desired size is not immediately available, you can use paper that is set in a different tray.
Operation
Tap the job status display.
Tap the key of the job for which "Paper Empty" appeared.
Tap the [Change Paper] key on the action panel.
Tap the key for the tray containing the paper that you wish to use, and tap
.
If you changed to a different paper size, printing may not take place correctly; for example
part of the text or image may run off the paper.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
515 of 1441 3/17/2016 7:14 AM
To Next Page
