SPECIFYING A BILLING CODE USING THE
PRINTER DRIVER
Overview
You can enter a billing code using the printer of the machine.
When using the printer, you can only enter a billing code by directly typing it in.
For an overview of a billing code, refer to "BILLING CODE".
Enable billing code
This setting is required only in the Windows environment. (Always usable under Macintosh
environment)
Click the [Start] button, then select [Devices and Printers].
In Windows Vista, click the [Start] button, then select [Control Panel] - [Printers].
In Windows XP/Server 2003, click the [Start] button, then click [Printers and Faxes].
In Windows 8, right-click on the Start window (or swipe up from the lower end of the
window), then click the App Bar → [All apps] → [Control Panel] → [Hardware and
Sound] → [Devices and Printers].
In Windows XP, if [Printers and Faxes] does not appear in the [Start] menu, select [Control
Panel] - [Printers and Other Hardware] - [Printers and Faxes].
Right-click the printer driver icon of the machine
In Windows XP/Server 2003/Vista, click the printer driver icon of the machine.
Click [Printer Properties].
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
519 of 1441 3/17/2016 7:14 AM
To Next Page
