Macintosh
If you select "Setting Mode (Administrator)" - [Billing Code Setting] - [Administration
Settings] and set [Use Billing Code] to Enable, the specified billing code is disabled, and
it is not recorded in the job log.
If you have started printing without specifying a billing code, a use code is recorded in
the job log.
Select [Billing Code].
Enter the main code and sub code
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
522 of 1441 3/17/2016 7:14 AM
To Next Page
