Send the original.
Tap the [Start] key.
You can check the preview image by tapping the [Preview] key before
tapping the [Start] key. After you have scanned an original by tapping the
[Preview] key, tap the [Additional Scan] key to scan the next original.
If you tap the [File] key or [Quick File] key on the action panel before
starting fax transmission, you can save the scanned original as data.
QUICK FILE
FILE
When the original is placed on the document glass:
If you placed the original on the document glass, carry out the following
procedure to send a fax.
When sending a fax normally (memory transmission)
Repeat the steps for placing and scanning the originals the same
number of times as there are originals. After scanning all originals,
tap the [Read-End] key. (After you have scanned an original by
tapping the [Preview] key, tap the [Additional Scan] key to scan the
next original. Then, tap the [Start] key to send the original.)
When sending a fax in direct transmission mode
Multi-page originals cannot be scanned in direct transmission mode.
Tap the [Start] key to start transmission.
When sending a fax in direct transmission mode
Multiple originals cannot be scanned in direct transmission mode. Tap the
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
534 of 1441 3/17/2016 7:14 AM
To Next Page
