USING A TRANSMISSION LOG TO RESEND
Overview
Select a destination from a transmission log and resend the data.
The destinations of the most recent 50 transmissions by fax, Scan to E-mail, and/or
Internet fax are stored. One of these can be selected to resend to that destination. The
destinations of the FTP/Desktop transmission and Scan to Network Folder are also
shown in the transmission log.
The addresses shown in the transmission log can also be stored in an address book. This
is a convenient way to store the fax numbers and addresses of destinations that were
manually entered. However, addresses of the FTP/Desktop/Network Folder transmission
cannot be stored from the machine.
Operation
Tap the [Select among addresses recently sent to] key on the action panel.
Tap the key of the fax destination that you wish to redial.
The last 50 addresses used for transmission are displayed.
If numeric keys were tapped during the previous transmission, the number may
not be redialed correctly.
The fax addresses below are not stored as addresses for which resend is
possible.
One-touch key for a contact or group in which multiple destinations are
stored.
Broadcasting destinations
Destinations transmitted to using a program
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
544 of 1441 3/17/2016 7:14 AM
To Next Page
