Sharp MX-M365N - Page 554

THE SIZE OF THE PLACED ORIGINAL
When a standard size original is placed, the original size is automatically detected and
displayed in "Scan Size" in the base screen.
SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE
SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES
Standard sizes
Standard sizes are sizes that the machine can automatically detect. The standard sizes
are set in "Original Size Detector Setting" in setting mode.
List of original size detector settings
Selections
Standard sizes (detected original sizes)
Document Glass
Document feeder tray (automatic doc
ument feeder)
Inch-1 11"x17", 8-1/2"x14", 8-1/2"x11",
8-1/2"x11"R, 5-1/2"x8-1/2"
11" x 17", 8-1/2" x 14", 8-1/2" x 11",
8-1/2" x 11"R, 5-1/2" x 8-1/2", A4, A3
Inch-2 11"x17", 8-1/2"x13" (216 mm x 330 mm
),
8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-1
/2"
11" x 17", 8-1/2" x 13" (216 mm x 330
mm), 8-1/2" x 11", 8-1/2" x 11"R, 5-1/
2" x 8-1/2", A4, A3
Inch-3 11"x17", 8-1/2"x13-2/5" (216 mm x 34
0 mm),
8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-1
/2"
11" x 17", 8-1/2" x 13-2/5" (216 mm x
340 mm), 8-1/2" x 11", 8-1/2" x 11"R,
5-1/2" x 8-1/2", A4, A3
AB-1 A3, A4, A4R, A5, B4, B5, B5R 8-1/2" x 11", 8-1/2" x 14", 11" x 17",
When the automatic original detection function is operating and the original (of inch or
non-standard size) is placed, the closest standard size may be displayed or the original size
may not appear. In this event, manually set the correct original size.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
554 of 1441 3/17/2016 7:14 AM