USING THE AUTOMATIC DOCUMENT FEEDER
FOR FAXING IN DIRECT TX MODE
Overview
Sending a scanned original without saving it in the machine's memory is called "Direct TX".
This section explains how to scan the original through the automatic document feeder and directly
send it.
Operation
Place the original in the document feeder tray of the automatic document
feeder.
AUTOMATIC DOCUMENT FEEDER
Tap the [Send Directly] key on the action panel.
The following functions cannot be used with direct transmission:
Timer Transmission, 2in1, Card Shot, Job Build, Polling Memory, Original Count,
File, Quick File, Memory Box, Book Divide, Poling, 2-Sided Scan, Search Global
Address Book
Resending will not take place when a direct transmission is not successful due to
a communication error or other reason.
If a fax transmission is already in progress when the direct transmission operation
is performed, the direct transmission will wait until the previous transmission is
finished. When the previous transmission is completed, the direct transmission will
begin.
While the direct transmission is waiting, the job status display can be tapped to
display the job status screen. No other operations are possible.
FAX JOBS
In direct transmission mode, the [Preview] key cannot be used for transmission.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
563 of 1441 3/17/2016 7:14 AM
To Next Page
