USING THE DOCUMENT GLASS TO SEND A
FAX IN DIRECT TX MODE
Overview
Sending a scanned original without saving it in the machine's memory is called "Direct
TX".
This section explains how to scan the original placed on the document glass and directly
send data.
When sending a fax from the document glass in direct transmission mode, only one page
can be transmitted.
Operation
The following functions cannot be used with direct transmission:
Timer Transmission, 2in1, Card Shot, Job Build, Polling Memory, Original Count,
File, Quick File, Memory Box, Book Divide, Poling, 2-Sided Scan, Search Global
Address Book
Resending will not take place when a direct transmission is not successful due to
a communication error or other reason.
If a fax transmission is already in progress when the direct transmission operation
is performed, the direct transmission will wait until the previous transmission is
finished. When the previous transmission is completed, the direct transmission will
begin.
While the direct transmission is waiting, the job status display can be tapped to
display the job status screen. No other operations are possible.
FAX JOBS
In direct transmission mode, the [Preview] key cannot be used for transmission.
Do not place any objects under the original size detector. Closing the automatic document
feeder with an object underneath may damage the original size detector plate and prevent
correct detection of the document size.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
568 of 1441 3/17/2016 7:14 AM
To Next Page
