Sharp MX-M365N - Page 571

TRANSMISSION USING THE SPEAKER
Overview
When the speaker is used to dial, the fax is sent after the number is dialed and the
connection is established.
Operation
Place the original.
Place the original in the document feeder tray of the automatic document feeder,
or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
Tap the [Speaker] key.
When the connection is established, you will hear the dial tone through the
machine's speaker.
If a person answers, you will be able to hear his or her voice, but you will not be
able to speak.
When the speaker is used, transmission takes place without scanning the original
into memory.
A destination that includes an F-code (sub-address and passcode) cannot be
used.
A one-touch key that has multiple destinations or has a non-fax destination
cannot be used.
In speaker mode, the [Preview] key cannot be used for transmission.
After tapping the [Speaker] key, use the slider that is displayed when you tap the [Speaker
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
571 of 1441 3/17/2016 7:14 AM