Tap the [Confirm Address] key on the action panel.
Confirm the destination.
Tap the [Start] key to start scanning of the original.
If you inserted the original pages in the document feeder tray, all pages are
scanned.
A beep will sound to indicate that scanning and transmission have ended.
If you placed the original on the document glass, scan each page one at a
time.
When scanning finishes, place the next original and tap the [Start] key.
Repeat the procedure until all pages have been scanned and then tap the
destination using the numeric keys, tap before entering the next destination.
can be omitted before or after a destination entered using a one-touch key.
However, if "Be sure to press Next Address Key ( ) before selecting the next address"
is enabled in setting mode, tap < > before selecting the next destination.
To cancel a specified destination:
Tap the one-touch key of the destination that you wish to cancel, and tap the [Delete]
key on the action panel.
Tap the [Preview] key to check the preview of an image before sending a fax. For more
information, see "CHECKING THE IMAGE TO BE TRANSMITTED".
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
575 of 1441 3/17/2016 7:14 AM
To Next Page
