Tap the [Polling Memory] tab.
Tap the [Public Box] key from the folder list.
Tap the [Change Number of Times] key on the action panel.
Tap the [Once] key or [Unlimited] key to specify the number of times.
Tap the [Once] key if you want the document cleared from memory after it is
transmitted. Tap the [Unlimited] key to allow polling an unlimited number of times.
After the settings are completed, tap and .
Tap the [Start] key to start scanning of the original.
When the original is scanned, a preview image appears in the touch panel.
If you inserted the original pages in the document feeder tray, all pages are
scanned.
If you placed the original on the document glass, scan each page one at a
time.
When scanning finishes, place the next original and tap the [Start] key.
Repeat the procedure until all pages have been scanned and then tap the
[Read-End] key.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
671 of 1441 3/17/2016 7:14 AM
To Next Page
