DELETING A DOCUMENT STORED FOR
F-CODE POLLING TRANSMISSION
Overview
Delete the document stored in an F-code memory polling box in order to be able to
store a new document.
Operation
Tap the [Others] key, and tap the [Memory Box] key.
Tap the [Polling Memory] tab.
Tap the folder of the F-code memory polling box.
Tap the [Empty out Box] key on the action panel.
You can tap the [Check Registered Data] key to check the image in the touch
panel before deleting it.
Tap the [Yes] key
The document is deleted, and you return to Step 2.
A document in a memory box cannot be deleted while the document is being
transmitted.
To perform this operation, the user must have [Access to Fax Data] permission.
If you tap the [Check Image] key on the action panel, you can check the image
before it is erased.
To cancel the document deletion:
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
692 of 1441 3/17/2016 7:14 AM
To Next Page
