Operation
Place the original.
Place the original in the document feeder tray of the automatic document feeder,
or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
Specify the destination.
ENTERING A DESTINATION NUMBER USING THE NUMERIC KEYS
RETRIEVING A DESTINATION NUMBER FROM AN ADDRESS BOOK
THE SELECTED DESTINATIONS
USING A SEARCH NUMBER TO RETRIEVE A DESTINATION
RETRIEVING A DESTINATION NUMBER FROM A GLOBAL ADDRESS
BOOK
USING A TRANSMISSION LOG TO RESEND
SENDING BY CHAIN DIALING
It is not necessary for the destination machines to support F-code
communication.
Your machine (the machine that requests a relay broadcast transmission) only
bears the cost of sending the fax to the relay machine. The relay machine bears
the cost of sending the fax to each of the destination machines.
If necessary, this function can be used in combination with a broadcast
transmission or timer transmission. It is convenient to store this function in a
program.
When faxes forwarded using this function are printed at the forwarding destination, the
date and time of reception cannot be printed on the faxes. ("Receiving Date & Time Print"
is disabled.)
To create F-code memory boxes:
In "Setting mode", select [System Settings] → [F-Code Memory Box].
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
695 of 1441 3/17/2016 7:14 AM
To Next Page
