THE SIZE OF THE PLACED ORIGINAL
When a standard size original is placed, the original size is automatically detected and
displayed in "Scan Size" on the base screen.
SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE
SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES
Standard sizes
Standard sizes are sizes that the machine can automatically detect. To specify the
standard size, select [System Settings] → [Device Control] → [Original Size Detector
Setting] in "Setting mode".
List of original size detector settings
Selections
Standard sizes (detected original sizes)
Document Glass
Document feeder tray (automatic doc
ument feeder)
Inch-1 11"x17", 8-1/2"x14", 8-1/2"x11",
8-1/2"x11"R, 5-1/2"x8-1/2"
11" x 17", 8-1/2" x 14", 8-1/2" x 11",
8-1/2" x 11"R, 5-1/2" x 8-1/2", A4, A3
Inch-2 11"x17", 8-1/2"x13" (216 mm x 330 mm
),
11" x 17", 8-1/2" x 13" (216 mm x 330
mm), 8-1/2" x 11", 8-1/2" x 11"R, 5-1/
When an original of 8-1/2" x 14" in size is detected, the image setting direction is
automatically set so that it will be scanned starting from the top side. Likewise, when
mixed-size originals of 8-1/2" x 14" and 8-1/2" x 11" in size are detected, all
originals are automatically set so that they will be scanned starting from the top side.
If the setting is manually changed, that setting has priority.
When the automatic original detection function is operating and a non-standard size
original (of inch or non-standard size) is placed, the closest standard size may be
displayed or the original size may not appear. In this event, manually set the correct
original size.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
722 of 1441 3/17/2016 7:14 AM
To Next Page
