EasyManua.ls Logo

Sharp MX-M365N - Page 736

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USING A TRANSMISSION LOG TO RESEND
Overview
Select a destination from a transmission log and resend the data.
The destinations of the most recent 50 transmissions by Scan to E-mail, Internet fax
(including Direct SMTP addresses), and/or fax are stored. Select one of these to resend
to that destination. The destinations of the FTP/Desktop transmission and Scan to
Network Folder are also shown in the transmission log.
The addresses shown in the transmission log can also be stored in an address book. This
is convenient when storing an address that was manually entered. However, addresses
of the FTP/Desktop transmission cannot be stored from the machine.
Operation
Tap the [Select among addresses recently sent to] key on the action panel.
Tap the key of the destination to resend.
The last 50 addresses used for transmission are displayed.
If a screen requiring you to enter the user name and password appears, enter the
information.
When a destination for retransmission is selected in the transmission log screen,
the mode of the selected destination is automatically selected.
The following types of addresses are not stored for resending.
One-touch key for a contact or group in which multiple destinations are
stored.
Broadcasting destinations
Destinations transmitted to using a program
The user name and password are not stored for security reasons. If a screen
requiring you to enter such information appears, enter the information again.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
736 of 1441 3/17/2016 7:14 AM