EasyManua.ls Logo

Sharp MX-M365N - Page 750

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Tap the [Start] key to start scanning of the original.
If the original is placed on the document glass, the [Read-End] key appears
in the touch panel.
If the original is only one page, go to step 8. To scan more pages, go to the
next step.
If the original was inserted in the document feeder tray, a beep will sound
when scanning is completed and transmission will take place.
If the original was placed on the document glass, replace it with the next
original and tap the [Start] key.
Repeat until all originals have been scanned.
Tap the [Read-End] key.
A beep will sound to indicate that the operation is completed.
Open the automatic document feeder and remove the original.
Tap the [Preview] key to check the preview of an image before sending the original.
If no action is taken for one minute after the confirmation screen is displayed,
scanning automatically ends and the transmission is reserved.
Tap the [Change Setting] key to change the exposure, resolution, scan size, and
send size for each original page scanned.
However, when "2in1" or "Card Shot" is selected in Others, only change the
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
750 of 1441 3/17/2016 7:14 AM