To change the file name, tap the [File Name] entry box.
After the settings are completed, tap .
Tap the key of the file name from the list.
To directly enter the file name, tap the [Direct Entry] key.
To change the body text, tap the [Body Text] entry box.
Enter the body text.
After the settings are completed, tap .
To select a pre-set text previously stored in the Setting mode (Web
version), tap the [Pre-set Message] key.
To directly enter the body text, tap the [Edit] key.
To clear all entered text:
Tap the [Clear All] key. When this key is tapped, the entire body of the message is erased
immediately; not just the selected line.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
753 of 1441 3/17/2016 7:14 AM