EasyManua.ls Logo

Sharp MX-M365N - Page 770

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFYING THE ORIGINAL SCAN SIZE USING
NUMERIC VALUES
Overview
When scanning a non-standard size original such as a card or postcard, specify the
original size using numeric values after placing the original.
The width can be from 1" to 17" (25 mm to 432 mm), and the height can be from 1" to
11-5/8" (25 mm to 297 mm).
Operation
Tap the [Original] key.
After tapping the "Scan Size" key, tap the [Direct Entry] key.
Specify the original size.
When the scan size is specified by numeric values, the send size cannot be specified.
Tap the areas displaying width and height sizes respectively, and enter the sizes
using the numeric keys.
It is convenient to use to finely adjust the entered size.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
770 of 1441 3/17/2016 7:14 AM