CHANGING FORMAT IN INTERNET FAX MODE
Overview
Change the file format (file type and compression mode) for sending a scanned image in
Internet Fax mode.
The file format for sending an Internet fax is normally set to [TIFF-F]. If the destination
Internet fax machine does not support full mode (it only supports simple mode), select
[TIFF-S].
Operation
Tap the [File Format] key.
Tap the [TIFF-S] or [TIFF-F] key to specify the file format.
If you selected [TIFF-F], select the compression mode.
After the settings are completed, tap .
When [TIFF-S] is selected, the transmission settings are restricted as follows:
Resolution: The selections are [200x100dpi] and [200x200dpi].
If [TIFF-S] is selected after [200x400dpi], [400x400dpi] or [600x600dpi] is
selected, the resolution automatically changes to [200x200dpi].
Send size: Always 8-1/2" x 11"R (A4R).
If [TIFF-S] is selected after the send size is changed, the send size is
automatically fixed to 8-1/2" x 11"R (A4R). If a size larger than 8-1/2" x 11"
(A4) is scanned, the size will automatically be reduced to 8-1/2" x 11"R (A4R).
When this format is included in a broadcast transmission, the image will be
transmitted to all destinations in 8-1/2" x 11"R (A4R).
Others: When a ratio setting is selected and the original size is entered, Dual Page
Scan, Card Shot, 2in1, 4in1, or Mixed Size Original cannot be used.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
783 of 1441 3/17/2016 7:14 AM