STORING SCAN OPERATIONS
(PROGRAM)
Overview
This function collectively stores various settings as one program. The stored program
can be retrieved using an easy operation.
For example, suppose 8-1/2" x 11" (A4) size documents are scanned into a file and
sent to each branch office once a month.
The same documents are sent to each branch office
Each page of a bound document is successively transmitted
Smudges on the edges of the documents are erased before transmission
When a job program is not stored When a job program is stored
Enter the address of each branch office.
Select Dual Page Scan.
Specify Erase.
Tap the [Start] key.
Scan and send the original.
Tap the key of a stored program.
Tap the [Start] key.
Scan and send the original.
Considerable time is required to send the docum
ents each month because the above settings mu
st be selected.
In addition, mistakes are occasionally made when
selecting the settings.
When a program is stored, settings are selecte
d with ease by simply tapping the key of the pr
ogram.
In addition, transmission takes place based on
the stored settings so there are no chances f
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
788 of 1441 3/17/2016 7:14 AM