Tap the [Others] key, and tap the [Contrast] key.
Tap or slide the slider to adjust the contrast level.
After the settings are completed, tap and [Back] keys in sequence.
Tap the [Start] key to start scanning of the original.
If you inserted the original pages in the document feeder tray, all pages are
scanned.
A beep will sound to indicate that scanning and transmission have ended.
If you placed the original on the document glass, scan each page one at a
time.
When scanning finishes, place the next original and tap the [Start] key.
Repeat the procedure until all pages have been scanned and then tap the
[Read-End] key.
A beep will sound to indicate that scanning and transmission have ended.
To cancel the contrast settings:
Tap the [Off] key.
Tap the [Preview] key to check the preview of an image before sending a fax. For more
information, see "CHECKING THE IMAGE TO BE TRANSMITTED". However, settings for
this function cannot be changed in the preview screen.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
812 of 1441 3/17/2016 7:14 AM