STARTING A TRANSMISSION AT A SPECIFIED
TIME
(TIMER TRANSMISSION)
Overview
Specify a time at which a transmission or broadcast transmission will automatically take
place. Transmission begins automatically at the specified time.
This function is helpful when you wish to perform reserved, broadcast or other
transmissions during your absence or at night or other times when telephone rates are
low.
When a timer transmission is set, keep the main power switch in the " "
position. If the main power switch is in the " " position at the specified time,
transmission will not take place.
When performing a timer transmission, you must scan the original into memory
when you set up the transmission. It is not possible to leave the document in the
document feeder tray or on the document glass and have it scanned at the
reserved time of transmission.
Up to 100 timer transmissions can be stored at once.
Settings selected for a timer transmission (exposure, resolution, and other
functions) are automatically cleared after the transmission is finished. (However,
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
836 of 1441 3/17/2016 7:14 AM