EasyManua.ls Logo

Sharp MX-M365N - Page 845

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRINTING A PASSWORD-PROTECTED
FAX
(HOLD SETTING FOR RECEIVED DATA PRINT)
Enable this setting to have faxes received and stored in memory without being printed. To
print the faxes, a password must be entered.
When this function is used, a password entry screen appears in the touch panel when a fax
is received.
When the previously programmed 4-digit password is entered using the numeric keys,
printing begins.
When the [Cancel] key is tapped, the password entry screen closes; however, the data in
memory key will blink in the touch panel. The password entry screen will reappear when
you tap the blinking key or change modes.
To perform this operation, the user must have [Access to Fax Data] permission.
To enable the hold setting for received data print:
In "Setting mode", select [System Settings] → [Image Send Settings] → [Operation
Settings] → [Default Settings] → [Hold Setting for Received Data Print].
To display the received data list screen after entering the password:
In "Setting mode", select [System Settings] → [Operation Settings] → [Job Detail
Settings] → [Preview Setting] → [Received Data Image Check Setting].
To transfer received data to another machine:
In "Setting mode", select [System Settings] → [Fax Data Receive/Forward].
You can check the received data image on the touch panel before printing.
CHECKING THE IMAGE BEFORE PRINTING
The received faxes will be stored in memory regardless of whether they are received
automatically or manually.
When the received data is transferred to another machine, data stored in memory is
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
845 of 1441 3/17/2016 7:14 AM