PRINTING RECEIVED DATA AT A SPECIFIED
TIME
Print received data at a specified time.
For stress-free printing, you should avoid printing large numbers of pages at peak times
during the day, and when you do not urgently need to print.
The printed data is automatically deleted from memory.
If the power is turned off at the specified time, printing will start at the timing when
the power is turned on.
This function can be specified when the Received Data Image Check Setting is
enabled.
If Hold Setting for Received Data Print is enabled, this function cannot be used.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
847 of 1441 3/17/2016 7:14 AM