EasyManua.ls Logo

Sharp MX-M365N - Page 849

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHECKING THE IMAGE BEFORE PRINTING
*
Overview
Check the image of received data on the touch panel before printing.
This function is available when [System Settings] → [Operation Settings] → [Preview
Setting] → [Received Data Image Check Setting] is enabled
*
in "Setting mode".
The factory default setting is disabled.
Operation
When data is received, is shown at the top of the screen.
The received data is listed.
Depending on the size of the received data, part of the check image on the touch
panel may not appear.
To perform this operation, the user must have [Access to Fax Data] permission.
The received data list can also be shown in the job status screen that appears when you
tap the job status display. The received data can be forwarded, deleted, or saved from
Received Data List.
FORWARDING RECEIVED DATA MANUALLY
SAVING RECEIVED DATA
In the System Information, select the [Event Information] tab and tap the [Check Fax
Reception Image] key
You can also display the received data list by tapping the job status display and tapping the
[Check Received Data] key on the action panel of Job Status screen.
Tap the key of the received data you wish to check, and tap the [Check Image] key on
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
849 of 1441 3/17/2016 7:14 AM