To store multiple sender addresses or fax numbers, repeat these steps.
When you have finished adding addresses, click the [Store] button.
Click [Inbound Routing Settings] in the "Setting mode (Web version)" menu
and click the [Add] button.
Enter a "Table Name".
Select the sender whose faxes will be forwarded.
To forward all received data, select [Forward All Received Data].
To forward only data received from specific senders, select [Forward
Received Data from Below Sender]. To forward all data except data from
specific senders, select [Forward Received Data from Senders except
Below]. Select the appropriate senders from the list and click the [Add]
button.
If you wish to have only faxes from specified addresses forwarded, store the
desired sender addresses. Send addresses stored here can be selected from a list
when you store a forwarding table.
A maximum of 500 sender numbers/addresses can be stored.
To delete an entered address, select the address in "Address to be Entered" and
click the [Delete] button.
A maximum of 50 forwarding tables can be stored.
When selecting senders from the "Sender Number/Address Setting" list, you can use the
[Shift] key or the [Ctrl] key on your keyboard to select multiple senders.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
855 of 1441 3/17/2016 7:14 AM