FORWARDING RECEIVED DATA MANUALLY
*
Overview
Received faxes can be forwarded manually after receipt.
This function is available when [System Settings] → [Operation Settings] → [Preview
Setting] → [Received Data Image Check Setting] is enabled
*
in "Setting mode".
The factory default setting is disabled.
Operation
When data is received, is shown at the top of the screen.
The received data is listed.
Tap to show thumbnails of received images(Thumbnail screen). The list view or
thumbnails view can be changed depending on the setting mode.
In the System Information, tap the [Event Information] tab and tap the [Check Fax
Reception Image] key
You can also display the received data list by tapping the job status display and tapping the
[Check Received Data] key on the action panel of Job Status screen.
Tap the key of the received data you wish to forward, and tap the [Forward to Other
Address] key
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
860 of 1441 3/17/2016 7:14 AM