Completed job
Display Status
"OK" Normal termination
"Send OK" Transmission was completed.
[In Memory] Reception completed but the fax has not been
printed.
The received data (each page) has not been printed
or forwarded. (The received data has not been
deleted.)
"Received" Printed received fax data.
The fax has been received.
The received data (each file) was stored.
"Forward OK" The received data/received data (each file) has been forwa
rded.
"FAST communications in progress" FAST communications in progress
"Stopped" The job was stopped.
"Delete" Deleted received data in the image check screen.
"Number of successful transmission d
estinations/Total destinations OK"
Completion of a broadcast transmission, serial polling, or inb
ound routing operation.
If transmission to 3 destinations was successful out of a to
tal of 5, "003/005 OK" will appear.
"No response" An error occurred because there was no response from th
e destination.
"Busy" An error occurred because the other party was busy.
"OK REPORT" A "Successful reception" reply received
"NG REPORT" A "Delivery error" reply received
"NO REPORT" Delivery Confirmation Receive Timeout
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
87 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
