24
BEFORE USING THE MACHINE
LOADING PAPER IN OTHER TRAYS
Bypass tray
Loading envelopes
Only the front side of envelopes can be printed or copied on. Place the front side facing down.
1
Open the bypass tray.
When loading paper larger than 8-1/2" x 11"R or A4R, pull
out the extension guide.
Pull the extension guide all the way out.
2
Load the paper with the print side
facing down.
Insert the paper along the bypass tray guides all the way into the
bypass tray until it stops slowly. Inserting the paper with excessive
force may cause the leading edge to fold back. Inserting the paper
too loosely may cause skewed feeding or misfeeds.
The paper must not exceed the maximum number of sheets
and must not be higher than the indicator line.
3
Set the bypass tray guides correctly to
the width of the paper.
Adjust the bypass tray guides so that they slightly contact
the loaded paper.
When loading envelopes in the bypass tray, set the paper type.
► CHANGE THE SETTING OF THE PAPER TRAY (page 27)
!mxm6070_us_sg.book 24 ページ ２０１８年３月５日 月曜日 午後４時５２分
To Next Page
Loading...
Need help?
General
