Sharp MX-M6070 User Manual

18
BEFORE USING THE MACHINE
LOADING PAPER IN OTHER TRAYS
Bypass tray
Loading envelopes
Only the front side of envelopes can be printed or copied on. Place the front side facing down.
1
Open the bypass tray.
When loading paper larger than A4R or 8-1/2" x 11"R, pull
out the extension guide.
Pull the extension guide all the way out.
2
Load the paper with the print side
facing down.
Insert the paper along the bypass tray guides all the way into the
bypass tray until it stops slowly. Inserting the paper with excessive
force may cause the leading edge to fold back. Inserting the paper
too loosely may cause skewed feeding or misfeeds.
The paper must not exceed the maximum number of sheets
and must not be higher than the indicator line.
3
Set the bypass tray guides correctly to
the width of the paper.
Adjust the bypass tray guides so that they slightly contact
the loaded paper.
When loading envelopes in the bypass tray, set the paper type.
►
CHANGE THE SETTING OF THE PAPER TRAY (page 21)

Sharp MX-M6070 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Speed (Black & White)	60 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed (Black & White)	60 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Duplex Printing	Yes
Warm-up Time	20 seconds
Connectivity	USB, Ethernet, Wi-Fi
Monthly Duty Cycle	300, 000 pages
Original Size	A3, A4, A5
Paper Capacity	3, 000 sheets
Display	10.1-inch Touch Panel
Operating System Compatibility	Windows, macOS, Linux