Sharp MX-M6570

COPIER
35
COPYING ON SPECIAL PAPER
(Bypass Copy)
This section explains how to load 8-1/2" x 11" heavy paper in the bypass tray.
1
Load paper into the bypass tray.
► Bypass tray (page 21)
2
Select settings in the touch panel.
(1) Tap the [Heavy Paper 1], [Heavy Paper 2],
[Heavy Paper 3] or [Heavy Paper 4] key.
Tap the [Heavy Paper 1] key if the paper is 28 lbs.
bond to 65 lbs. cover (106 g/m
2
to 176 g/m
2
), the
[Heavy Paper 2] key if the paper is 65 lbs. cover to
80 lbs. cover (177 g/m
2
to 220 g/m
2
), the [Heavy Paper
3] key if the paper is 80 lbs. cover to 140 lbs. index
(221 g/m
2
to 256 g/m
2
), or the [Heavy Paper 4] key is
the paper is 140 lbs. index to 110 lbs. cover (257 g/m
2
to 300 g/m
2
).
(2) Tap the [Size: Auto-Inch] tab.
(3) Tap the [Auto-Inch] key.
(4) Tap of "Tray Settings".
3
Tap the [Easy Copy] mode icon.
Easy Copy mode screen appears.
Operation
Guide
Enlarge
Display Mode
Settings Total Count LCD Control
Toner Quantity Bk
Volume
10:15 AM
Type: Size: Auto-Inch
Auto-AB
Auto-Inch
Size Set
Direct Entry
Detection Size
Selection
Auto-AB
Auto-Inch
Feeding
Approved Job
Paper Property
Tray Settings
Bypass
A3W(12x18),A3,A4,A4R,A5R,B4,B5,B5R,
11x17,8½ x11
12x18(A3W),11x17, 8½ x14,
8½ x11, 8½ x11R,
5½ x 8½R,7½ x 10½ R,A3,A4,
B4,B5
Plain 1
Sharp OSA
(2)
(4)
(3)
Job Status
10:15 AM
Operation
Guide
Enlarge
Display Mode
Settings Total Count LCD Control
Toner Quantity Bk
Bypass
Feeding
Approved Job
Paper Property
Type: Plain 1 Size: Auto-Inch
Tray Settings
Please Select Paper Type.
Pre-Printed
Letter Head
Color
Pre-Punched
Recycled
Labels Transparency Tab Paper
Plain 1
(60-89g/m
2
)
Plain 2
(90-105g/m
2
)
Heavy Paper 1
(106-176g/m
2
)
Heavy Paper 3
(221-256g/m
2
)
Heavy Paper 4
(257-300g/m
2
)
Thin Paper
(55-59g/m
2
)
Heavy Paper 2
(177-220g/m
2
)
Volume
Sharp OSA
Job Status
(1)
Sharp OSAPrint Release
Settings Total Count LCD Control
Toner Quantity Bk
VolumeOperation
Guide
Enlarge
Display Mode
10:15 AM
Easy
Scan
Easy
Copy
Job Status