Sharp Notevision XR-32X - Resize Mode

30
Resize Mode
This function allows you to modify or customize the resize mode to enhance the input image. De-
pending on the input signal, you can choose a desired image.
Press RESIZE.
• See page 43 for setting on menu screen.
RESIZE
button
COMPUTER
For 4:3 screen For 16:9 screenInput signal
4:3 aspect ratio
5:4 aspect ratio
16:10 aspect ratio
16:9 aspect ratio
: Cutout area on which images cannot be projected
: Area where the signals are off screen
Computer
Resolution
lower than
XGA
XR-32X XR-32S
XGA SVGA
Resolution
lower than
SVGA
Resolution
higher than
XGA
Resolution
higher
than
SVGA
SXGA (1280 × 1024)
1280 × 720
1280 × 768
1280 × 800
1360 × 768
1366 × 768
STRETCH
Image type
NORMAL FULL BORDERDOT BY DOT
*
1
*
1
*
2
*
2
*
2
*
2
*
1,
*
3
*
1
*
1
*
1
*
1
*
2
*
3
The Image Shift function can be used for these images.
Same as NORMAL mode.
For XR-30S model, you cannot select BORDER when the resolution (1280 x 1024, etc.) that the horizontal ratio is smaller than 4:3 aspect ratio is
selected.
Image Projection (Continued)
XR-32X
XR-32S
Main resolution
SVGA (800 x 600)
XGA (1024 x 768)
SXGA (1152 x 864)
1280 x 800
SVGA (800 x 600)
XGA (1024 x 768)
SXGA (1152 x 864)
1280 x 800
DOT BY DOT
800 x 600
1152 x 864
1280 x 800
1024 x 768
1152 x 864
1280 x 800
BORDER
768 x 576
922 x 576
600 x 450
720 x 450
STRETCH
1024 x 576
800 x 450
NORMAL
1024 x 768
1024 x 640
800 x 600
800 x 500
FULL
1024 x 768
800 x 600