What to do if Sharp Notevision PG-D45X3D Projector image has vertical stripes or is flickering?
If your Sharp Projector displays vertical stripes or a flickering image, first try the 'Auto Sync' adjustments. If the issue persists, manually adjust vertical and horizontal noise settings, and then reset these two settings.
General| Brightness | 4500 ANSI lumens |
|---|---|
| Resolution | 1024 x 768 (XGA) |
| Aspect Ratio | 4:3 |
| Display Type | DLP |
| Screen Size | 30 - 300 inches |
| Video Modes | 720p, 1080i |
| Keystone Correction | ±40° Vertical |
| Input Terminals | HDMI, VGA, Composite Video, S-Video |
| Output Terminals | VGA |
| Operating Temperature | 5 to 35 degrees Celsius |
| Storage Temperature | -20 to 60 degrees Celsius |
Essential safety precautions for operating the projector to prevent electrical shock or fire hazards.
Details on achieving desired image size based on projection distance.
Guides connecting PCs via RGB, DVI, USB, and LAN interfaces.
Details connecting video sources (HDMI, Component) and audio devices.
Procedures for powering the projector on, off, and entering standby mode.
Information on lamp replacement, cautions, and procedures.
Common problems and their solutions for projector issues.
Technical details, dimensions, and performance characteristics of the projector.
To Next Page