Sharp Notevision PG-D45X3D User Manual

48
Keylock Function
Locking the Operation
Buttons on the Projector
Use this function to lock the operation buttons
on the projector.
Locking the Operation Buttons
Hold down ENTER on the projector for about
5 seconds while the projector is being turned
on.
On-screen display
The Keylock function does not affect the
operation with the remote control buttons.
You cannot use the Keylock function while the
projector is warming up.
Taking the Keylock off
Hold down ENTER on the projector for about
5 seconds.
On-screen display
When the projector is in Standby mode, you can
release the keylock by holding down ENTER
and STANDBY/ON on the projector
simultaneously for about 5 seconds.
Info
Keylock cannot be set while the projector is:
displaying the “Menu” screens, in Standby
mode, warming up, changing input signals,
operating Auto Sync function, in Freeze mode
or on the “System Lock” screen during
warming up.
•
■
•
•
■
•
Adjusting the Projector Function (“PRJ - ADJ” Menu)
(Continued)

Sharp Notevision PG-D45X3D Specifications

General

Brand	Sharp
Model	Notevision PG-D45X3D
Category	Projector
Language	English