Need help?Do you have a question about the Sharp XV-100ZM and is the answer not in the manual?
Proper placement and orientation of the projector and screen for optimal viewing.
Adjusting the projector's angle and height for screen alignment.
Adjusting picture contrast, brightness, colour, and sharpness.
Enables a blue screen when no signal is input, with auto-off function.
Procedure for cleaning or replacing the projector's air filter.
Troubleshooting guide for lamp service and temperature indicators.
Common troubleshooting steps before contacting service personnel.
Step-by-step removal of the projector's front section.
Procedure for removing the main circuit board and rear cooling fan.
Removing ballast unit, fan, and power circuit board.
Procedure for accessing and removing the LCD panels.
Instructions for gently cleaning the LCD panel surface.
Steps for safely removing the projector lamp.
Diagram showing the arrangement of optical components within the projector.
Adjusting component angles to ensure parallel light beams for color accuracy.
Repositioning LCD units to be parallel with condenser lenses for focus.
Procedures for cleaning optical surfaces using specific agents and methods.
Steps for adjusting the LCD panel after replacement for optimal image display.
Aligning G and B images with the R image by adjusting LCD holder positions.
Adjusting Red-Blue image overlap using X and Y controls.
Adjusting Red-Green image overlap using X and Y controls.
To Next Page
General
