To Next PageTo Next PageWhy is the color faded or poor on my Sharp XV-Z2000?
If the color on your Sharp Projector appears faded or poor, it could be due to incorrectly set image adjustments, a wrongly configured video input system, or an incorrect input signal type (RGB/Component). Ensure the input signal type is set correctly.
What to do if my Sharp XV-Z2000 picture is blurred or has noise?
If your Sharp Projector's picture is blurred or shows noise, the projection distance might exceed the focus range. Adjust the projector position or adjust the focus from settings.
Why does my Sharp Projector have no picture?
If your Sharp Projector displays no picture, several factors could be at play. First, the selected input mode might be incorrect. Second, the cables might be incorrectly connected to the rear panel of the projector. Finally, the “Contrast” and “Bright” settings might be set to the minimum position. Adjust “Contrast” and “Bright” settings to appropriate levels.
Why does the lamp on my Sharp XV-Z2000 take a long time to turn on?
If the lamp on your Sharp Projector takes a long time to turn on, the lamp may have reached the end of its life.
General| Projection distance | 2.6 - 3.9 m |
|---|---|
| Contrast ratio (typical) | 2500:1 |
| Screen size compatibility | 40 - 200 \ |
| Projector native resolution | SXGA (1280x1024) |
| Lamp type | SHP |
| Lamp power | 275 W |
| Light source type | Lamp |
| Service life of light source | 3000 h |
| Video in | XGA, Mac 19” (in intelligent compression), SVGA/VGA, Mac 16”/13” |
| I/O ports | 2x component, 1x RCA video, 1x S-video, DVI-I (analogue component, digital & analogue RGB) x 1 |
| Dimensions (WxDxH) | 310 x 287 x 104 mm |
| Power requirements | 100-240V AC, 50/60Hz |
| Power consumption (typical) | 360 W |
| Market positioning | Home cinema |
Weight and Dimensions| Weight | 4300 g |
|---|
Covers lamp hazards, setup environment, impact, temperature, and vent blocking.
Covers projector usage, connecting other equipment, international use, and temperature monitoring.
Identifies projector parts, buttons, and indicators on Top, Front, and Rear views.
Identifies buttons and functions of the remote control.
Shows effective range and instructions for inserting batteries.
Basic steps for projector setup and initial projection.
Guides for projector placement, distance, and image size.
Instructions for reversed image, mirror projection, and ceiling mounting.
Overview of projector input terminals and compatible devices.
Illustrates cable types for connecting various equipment.
Guides for connecting DVD players, VCRs, and other video devices.
Instructions for connecting PCs via RGB or DVI interfaces.
Using RS-232C for projector control from a computer.
Procedures for connecting power, powering on, and entering standby.
Selecting input sources, focus, zoom, and aspect ratios.
Using adjustment feet and correcting trapezoidal distortion.
Selecting picture presets, brightness, contrast, and high-light modes.
Overview of menu structure and accessing adjustment/setting screens.
Adjusting image, color temperature, gamma, and picture modes.
Fine-tuning computer image parameters and sync.
Configuring lamp life, OSD, video system, eco mode, and menus.
Selecting display language and adjusting projection orientation.
Instructions for cleaning the projector, lens, and vents.
Explains the meaning of the TEMP. and Lamp indicators.
Lamp replacement, precautions, and timer reset.
Pin assignments for DVI and RS-232C interfaces.
Lists compatible computer resolutions and DTV signal formats.
Problem resolution, projector specs, dimensions, and glossary.
