Sharp XV-Z2000 User Manual

-50
Auto Power Off Function
Menu operation Page 40
Example: “Options” menu screen for
INPUT 1 mode
Description of Auto Power Off
Note
• When the Auto Power Off function is set to “ ”
(ON), 5 minutes before the projector enters the
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes.
Description
The projector automatically enters the
standby mode when no input signal is
detected for 15 minutes or longer.
The Auto Power Off function will be
disabled.
Selectable items
(ON)
(OFF)
Selecting the Menu Screen
Position
This function allows you to select the desired
position of the menu screen.
Menu operation Page 40
Example: “Options” menu screen for
INPUT 1 mode
Description of Menu Positions
Description
Displayed on the centre of the image.
Displayed on the upper right of the image.
Displayed on the lower right of the image.
Displayed on the upper left of the image.
Displayed on the lower left of the image.
Selectable items
Center
Upper Right
Lower Right
Upper Left
Lower Left
Centre
Upper
Right
Lower
Right
Upper
Left
Lower
Left
Menu screen
Screen
Position of the Menu Screen which Is
Displayed on the Screen
Using the “Options” Menu
XV-Z2000E_E_P47_52.p65 2004.10.20, 11:53 AM50

Sharp XV-Z2000 Specifications

General

Projection distance	2.6 - 3.9 m
Contrast ratio (typical)	2500:1
Screen size compatibility	40 - 200 \
Projector native resolution	SXGA (1280x1024)
Lamp type	SHP
Lamp power	275 W
Light source type	Lamp
Service life of light source	3000 h
Video in	XGA, Mac 19” (in intelligent compression), SVGA/VGA, Mac 16”/13”
I/O ports	2x component, 1x RCA video, 1x S-video, DVI-I (analogue component, digital & analogue RGB) x 1
Dimensions (WxDxH)	310 x 287 x 104 mm
Power requirements	100-240V AC, 50/60Hz
Power consumption (typical)	360 W
Market positioning	Home cinema

Weight and Dimensions

Weight	4300 g