Sharp XV-Z2000 User Manual

-20
Terminal on the
projector
INPUT 1, 2
INPUT 1, 2
INPUT 5/DIGITAL
INPUT 5/DIGITAL
INPUT 4
INPUT 4
INPUT 3
INPUT 3
RS-232C
Equipment
Audio-visual
equipment
Computer
Computer
Terminal on
connected equipment
Component
video output
terminal
Terminal
for using
the
dedicated
cable
DVI output
terminal
RGB output
terminal
Video
output
terminal
Terminal
for using
the
dedicated
cable
S-video
output
terminal
Terminal
for using
the
dedicated
cable
RS-232C
terminal
Cable
Component cable (commercially available)
Dedicated cable attached to the connected equipment.
DVI cable (sold separately: AN-C3DV)
Video cable (supplied)
Dedicated cable attached to the connected equipment.
S-video cable (commercially available)
Dedicated cable attached to the connected equipment.
RS-232C cable (commercially available)
Samples of Cables for Connection
•For more details of connection and cables, refer to the opeation manual of the connecting equipment.
•You may need other cables or connectors not listed below.
RGB cable (commercially available)
DVI to 15-pin D-sub adapter (sold separately: AN-A1DV)
XV-Z2000E_E_P19_27.p65 2004.10.20, 11:51 AM20

Sharp XV-Z2000 Specifications

General

Projection distance	2.6 - 3.9 m
Contrast ratio (typical)	2500:1
Screen size compatibility	40 - 200 \
Projector native resolution	SXGA (1280x1024)
Lamp type	SHP
Lamp power	275 W
Light source type	Lamp
Service life of light source	3000 h
Video in	XGA, Mac 19” (in intelligent compression), SVGA/VGA, Mac 16”/13”
I/O ports	2x component, 1x RCA video, 1x S-video, DVI-I (analogue component, digital & analogue RGB) x 1
Dimensions (WxDxH)	310 x 287 x 104 mm
Power requirements	100-240V AC, 50/60Hz
Power consumption (typical)	360 W
Market positioning	Home cinema

Weight and Dimensions

Weight	4300 g