Sharp XV-Z2000 User Manual

-9
Introduction
38
Adjustment buttons
('/"/\/|)
Select menu items and other
settings.
29
INPUT button
Switch input mode 1, 2, 3, 4,
5 or DIGITAL.
30
10
5410
54
ZOOM/FOCUS button
Adjust the projected image
size or adjust the focus.
Temperature warning
indicator
Lamp indicator
10
Power indicator
31
31
13
Remote control sensor
HEIGHT ADJUST button
Front adjustment foot
(on the bottom of
the projector)
38
MENU button
Display adjustment and
setting screens.
39
ENTER button
Set items selected or
adjusted on the menu.
34
UNDO button
Undo an operation or
returning to the previous
display.
28
STANDBY button
Put the projector into standby
mode.
34
RESIZE button
Switch the picture display
(STRETCH, SIDE BAR, etc.).
28
ON button
Turn the power on.
Projector
Part Names and Functions
• Attaching the lens cap
Push the lens cap on until it clicks
into position.
• Removing the lens cap
Pull the lens cap directly outward.
Numbers in refer to the main pages in this operation manual where the topic is explained.
Top View
Front View
XV-Z2000E_E_P06_15.p65 2004.10.20, 11:50 AM9

Sharp XV-Z2000 Specifications

General

Projection distance	2.6 - 3.9 m
Contrast ratio (typical)	2500:1
Screen size compatibility	40 - 200 \
Projector native resolution	SXGA (1280x1024)
Lamp type	SHP
Lamp power	275 W
Light source type	Lamp
Service life of light source	3000 h
Video in	XGA, Mac 19” (in intelligent compression), SVGA/VGA, Mac 16”/13”
I/O ports	2x component, 1x RCA video, 1x S-video, DVI-I (analogue component, digital & analogue RGB) x 1
Dimensions (WxDxH)	310 x 287 x 104 mm
Power requirements	100-240V AC, 50/60Hz
Power consumption (typical)	360 W
Market positioning	Home cinema

Weight and Dimensions

Weight	4300 g