Sharp XV-Z2000 User Manual

-36
Menu Items
The following shows the items that can be set in the projector.
Note
• “Tint” cannot be used with PAL, SECAM, PAL-M, PAL-N or PAL-60.
• “Color”, “Tint”, “Sharp”, “Clock”, “Phase”, “H-Pos”, “V-Pos” and “Auto Sync” cannot be used in the DIGITAL
mode.
• “Fine Sync” menu cannot be displayed in the INPUT 3 and INPUT 4 modes.
“Picture” menu
“Fine Sync” menu
+30-30
+30-30
+30-30
+30-30
+30-30
+30-30
Tint
Color
Sharp
Bright
+30-30
Contrast
Red
Blue
Reset
Picture
IRIS
High Brightness
High Contrast
5500K
6500K
7500K
8500K
9300K
10500K
Main Menu Sub Menu
CLR Temp
Page 42
Page 42
Page 42
Page 43
Page 43
Page 44
Page 44
*1
*1
*1
*1: Items when selecting INPUT 1, 2, 3, 4 or when inputting component signal
through INPUT 5
Standard
Cinema 1
Cinema 2
Cinema 3
Gamma Adj.
Bright Boost [ON/OFF]
Picture Mode
Memory 1
Memory 2
Memory 3
Memory 4
Memory 5
Memory OFF
100
3-3
3-3
3-3
3-3
100
100
100
100
100
Fine Sync
+15-15
+30-30
+30-30
+30-30
Clock
Phase
H-Pos
V-Pos
Reset
Signal Info
Special Modes
Main Menu
Auto Sync [ON/OFF]
Page 45
Page 45
Page 45
Page 46
Page 46
*2
*2
*2
*2: Item when inputting RGB signal through INPUT 5
Example: Screen for INPUT 1
mode
Example: Screen for INPUT 5
(RGB) mode
Example: Screen for INPUT 5
(RGB) mode
XV-Z2000E_E_P36_37.p65 2004.10.20, 11:52 AM36

Sharp XV-Z2000 Specifications

General

Projection distance	2.6 - 3.9 m
Contrast ratio (typical)	2500:1
Screen size compatibility	40 - 200 \
Projector native resolution	SXGA (1280x1024)
Lamp type	SHP
Lamp power	275 W
Light source type	Lamp
Service life of light source	3000 h
Video in	XGA, Mac 19” (in intelligent compression), SVGA/VGA, Mac 16”/13”
I/O ports	2x component, 1x RCA video, 1x S-video, DVI-I (analogue component, digital & analogue RGB) x 1
Dimensions (WxDxH)	310 x 287 x 104 mm
Power requirements	100-240V AC, 50/60Hz
Power consumption (typical)	360 W
Market positioning	Home cinema

Weight and Dimensions

Weight	4300 g