Sharp PN-40TC1 Setup Manual

8
E
Specications
Model PN-40TC1
Power requirement AC 100 V - 240 V, 1.0 A, 50/60 Hz
Operating temperature * 41°F to 95°F (5°C to 35°C)
Operating humidity 20% to 80% (no condensation)
Power consumption (Maximum) 89 W
Dimensions (excluding protrusions) inch (mm)
Approx. 36-15/16 (W) x 2-9/16 (D) x 21-1/2 (H) (939 x 65 x 546)
Weight lbs. (kg)
Approx. 38.6 (17.5)
* When using the monitor laying at on a surface (when the monitor is tilted more than 20 degrees upward from the perpendicular in relation to
a level surface), use the monitor at a temperature between 41°F (5°C) and 86°F (30°C).
Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases,
please check the temperature condition specied by the optional equipments.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement
without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from
these values in individual units.

Sharp PN-40TC1 Specifications

General

Brand	Sharp
Model	PN-40TC1
Category	Monitor
Language	English