ENGLISH
7
E
To connect a computer to this monitor by wireless, connect the wireless adapter (supplied) to this monitor.
The wireless token contains the “MirrorOp for SHARP” software used to connect a computer by wireless.
Connect the wireless token to the computer that you want to display by wireless.
For details, see the Wireless Controller Operation Manual.
1. Remove the screw next to the wireless adapter port on
this monitor.
Wireless adapter port
2. Insert the wireless adapter (supplied) into the wireless
adapter port.
Wireless
adapter
3. Attach the wireless adapter cover (supplied), and
fasten with the screw you removed in step 1.
Wireless
adapter
cover
Caution
• On the PN-60TW3A, the wireless adapter extends out from
the monitor. Take care not to bump or pull on the terminal.
Connecting the wireless adapter
Connecting the wireless token
To Next Page
Loading...
