PN-L803C/80TC3 DISASSEMBLY AND ASSEMBLY 6 - 13
4) Remove the 17 screws (M3x6 SW+W) and remove the Main I/F PWB with the plates.
4) Remove the six screws O (M3x6 SW+W), the four hexagonal screws △ and the two screws (M3x8
B-Tight screw), and remove the Main PWB from the IF Angles.
Screw O M3x6 SW+W Screw△ M3x8 Hexagonal Screw Screw M3x8 B-Tight screw
To Next Page
Loading...
