EasyManua.ls Logo

Sharp PN-R706 - Page 41

Sharp PN-R706
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
E
PICTURE menu
Function
Command Direction
Parameter Reply Control/Response contents *
BRIGHT VLMP WR 0-31 0-31
CONTRAST CONT WR 0-60 0-60
BLACK LEVEL BLVL WR 0-60 0-60
TINT TINT WR 0-60 0-60
COLORS COLR WR 0-60 0-60
SHARPNESS SHRP WR 0-24 0-24
COLOR
ADJUSTMENT
COLOR MODE BMOD WR 0 0 STD
2 2 VIVID
3 3 sRGB (sRGB cannot be used when input mode is D-SUB[COMPONENT].)
4 4 HIGH ILLUMINANCE
WHITE BALANCE WHBL WR 0-2 0-2 0:THRU, 1:PRESET, 2:USER
PRESET CTMP WR 1-28 1-28
From 1: approximately 3000K to 15: approximately 10000K (500K steps)
16: approximately 5600K, 17: approximately 9300K, 18: approximately 3200K
From 19: approximately 10500K to 28: approximately 15000K (500K steps)
“ERR” when WHBL is not set to 1.
USER R-CONTRAST CRTR WR 0-256 0-256 “ERR” when WHBL is not set to 2.
G-CONTRAST CRTG WR 0-256 0-256
B-CONTRAST CRTB WR 0-256 0-256
R-OFFSET OFSR WR -127-127 -127-127
G-OFFSET OFSG WR -127-127 -127-127
B-OFFSET OFSB WR -127-127 -127-127
COPY TO USER CPTU W 0 Copies a preset value to the user setting.
GAMMA GAMM WR 0-9 0-9 0: 1.8, 1: 2.2, 2: 2.4, 3: DICOM SIMULATION, 4:USER, 5:2.0, 6:STD,
7:LIGHT 2, 8:LIGHT 1, 9:DARK
FLESH TONE FLES WR 0-2 0-2 0: OFF, 1: LOW, 2: HIGH
C.M.S.-HUE
CMHR WR -10-10 -10-10 R
CMHY Y
CMHG G
CMHC C
CMHB B
CMHM M
CRST W 1 Resets the hue.
C.M.S.-SATURATION
CMSR WR -10-10 -10-10 R
CMSY Y
CMSG G
CMSC C
CMSB B
CMSM M
CRST W 2 Resets the saturation.
ADVANCED AUTO
AGIN W 1 When the input mode is D-SUB[RGB].
-
ANALOG GAIN
ANGA WR 0-127 0-127 When the input mode is D-SUB[RGB].
ANALOG OFFSET
ANOF WR 0-127 0-127 When the input mode is D-SUB[RGB].
NR TDNR WR 0-2 0-2 0: OFF, 1: LOW, 2: HIGH
RGB INPUT RANGE INPR WR 0-2 0-2 0: AUTO, 1: FULL, 2: LIMITED
“ERR” when the input mode is D-SUB[COMPONENT].
When the input mode is DVI-D, or D-SUB[RGB] the value 0 is invalid.
DISPLAY COLOR PATTERN PTDF WR
0 0 No pattern display.
-
1 1 White single color pattern display.
2 2 Red single color pattern display.
3 3 Green single color pattern display.
4 4 Blue single color pattern display.
99 99 Red/green/blue mixed color pattern display.
Set each color's level with PTDR, PTDG, PTDB.
DISPLAY COLOR PATTERN
(R)
PTDR WR 0-255 0-255 Set the R, G, and B levels of the mixed color pattern.
“ERR” when PTDF is not set to 99.
DISPLAY COLOR PATTERN
(G)
PTDG WR 0-255 0-255
DISPLAY COLOR PATTERN
(B)
PTDB WR 0-255 0-255
DISPLAY COLOR PATTERN
(LEVEL)
PTDL WR 0-255 0-255 Set the white, red, green, and blue levels of the single color pattern.
“ERR” when the DISPLAY COLOR PATTERN is set to a color other than
white, red, green, or blue.
RESET ARST W 2
Controlling the Monitor with a PC (RS-232C)

Other manuals for Sharp PN-R706

Related product manuals