Need help?Do you have a question about the Sharp PN-R556 and is the answer not in the manual?
General| Screen Size | 55 inches |
|---|---|
| Brightness | 500 cd/m² |
| Contrast Ratio | 4000:1 |
| Response Time | 8 ms |
| Panel Type | LCD |
| Refresh Rate | 60 Hz |
| Viewing Angle | 178° (H) / 178° (V) |
| Input Terminals | HDMI, DisplayPort, VGA |
| Output Terminals | DisplayPort |
| Built-in Speakers | Yes |
| USB Ports | Yes |
| Resolution | 1920 x 1080 (Full HD) |
| VESA Mount | 400 mm x 400 mm |
Guidelines for safe installation, operation, and maintenance, including handling, ventilation, and power.
Measures to ensure child safety and proper monitor placement to prevent accidents.
Covers indoor use, VESA compliance, weight considerations, and authorized dealer involvement.
Instructions for connecting PCs and AV devices to the monitor.
Steps for powering the monitor on/off via buttons and understanding Power LED status.
Procedure for opening and navigating the monitor's OSD menu.
Controls for brightness, contrast, black level, tint, color, and sharpness.
Configuration for date/time, display language, and input selection.
Configuration for multi-monitor enlargement and bezel adjustment.
Settings for PIP modes, sub-screen size, position, blend, source, and sound.
Details on dual screen display modes, available combinations, and usage tips.
Setup for aligning multiple monitors for a larger display and image positioning.
Guide to performing automatic screen adjustment for PC display.
Options for resetting all or specific settings to factory defaults.
Details on communication conditions and settings for RS-232C control.
Instructions for connecting a PC to the monitor directly or in a daisy chain.
Assigning unique ID numbers to monitors for controlled access in a daisy chain.
Commands used for setting, assigning, and managing monitor ID numbers.
RS-232C commands for controlling monitor power states.
RS-232C commands for selecting and changing the input mode.
Commands for adjusting screen timing, phase, and image positioning.
Commands for adjusting brightness, contrast, black level, tint, color, and sharpness.
RS-232C commands for adjusting audio treble, bass, balance, and reset.
Commands for configuring date/time, input select, communication, and other setup options.
Commands for configuring multi-monitor enlargement and image positioning.
Commands for PIP modes, sound changes, screen motion, and power management.
RS-232C commands for monitor initialization, lock settings, and alerts.
Commands for screen size, volume, mute, information, and temperature acquisition.
Commands for transferring, reading, initializing, and saving GAMMA user data.
Steps to configure the monitor's IP address, subnet mask, and gateway.
Details on DHCP client, IP address, subnet mask, default gateway, and DNS server settings.
Connecting the monitor to a PC and temporarily setting the PC's IP address.
Using a web browser to access and control the monitor's functions.
Steps for setting up LAN parameters on the monitor using a PC.
Basic operations for controlling the monitor through its web browser interface.
Setting user name, password, Telnet connection, and IP address filtering for security.
Controlling the monitor using RS-232C commands via terminal software.
Resolving issues related to no picture, no sound, reversed audio, or one-sided sound.
Interpreting and resolving the Power LED flashing red and green alternately.
To Next Page
