25
E
Menu Items
n
SETUP
DATE/TIME SETTING
Set the date and time. Press
or
to select the date and time, and press
or to change the numerical values.
Set the date in “Month/Day/Year” order.
Set the time on a 12-hour basis. (Factory default)
DATE/TIME FORMAT
Sets the date/time display format.
DATE ..................MM/DD/YYYY, DD/MM/YYYY, YYYY/MM/DD
(YYYY: Year, MM: Month, DD: Day)
TIME ...................Select 12- or 24-hour time.
SCHEDULE (See page 31.)
You can turn the power on/off and change the screen brightness at a specied time.
LANGUAGE
Sets the display language for the menu screen.
INPUT SELECT
D-SUB
Select the input mode to be used in D-sub input terminal.
HDMI CEC LINK
When AUTO is selected, HDMI CEC LINK is enabled and the HDMI input terminal changes when playback is started on an
external device. When OFF is selected, AUTO POWER ON cannot be selected.
AUTO POWER ON
Sets whether the monitor power turns on when the power of an external device is turned on.
HDMI AUTO VIEW
When ON is selected, the screen size is adjusted automatically according to the screen size control signal included in the
video signal input from the HDMI input terminal or from the terminal connected via the expansion slot.
HOT PLUG CONTROL
Sets whether to use hot plug control for the DVI-D, HDMI1, and HDMI2 input terminals and the terminals connected via the
expansion slot.
DisplayPort STREAM
Selecting MST (Multi Stream Transport) allows different images to be displayed when daisy chaining two devices through the
monitor’s DisplayPort. Image may not be displayed properly depending on the computer (video card) to be connected.
DisplayPort SETTING
Sets FILTER SETTING, GAIN, and OFFSET for the signal from the DisplayPort input terminal.
AUDIO SELECT
Selects the terminal used to input audio signals in each input mode.
AUDIO OPTION
AUDIO OUTPUT
Sets the volume of sound output from the audio output terminal.
VARIABLE1 ........ You can adjust the volume from the speakers of this monitor and the audio output terminal simultaneously
by using VOLUME.
VARIABLE2 ........ You can adjust the volume from the audio output terminal by using VOLUME.
Sound will not be output from the speakers of this monitor.
FIXED................. Fixes the volume from the audio output terminal. Adjust the volume by using an external device.
You can adjust the volume from the speakers of this monitor by using VOLUME.
AUDIO INPUT LEVEL
Selects the maximum audio input level of the audio input terminal.
MONAURAL AUDIO
Outputs audio signals as monaural.
To Next Page
Loading...
