Sharp PN-Y475

9
E
Supplied Components
If any component should be missing, please contact your dealer.

Liquid Crystal Display Monitor: 1

Remote control unit: 1

Cable clamp: 2

Power cord

R-6 battery (“AA” size): 2

CD-ROM (Utility Disk for Windows): 1

Setup Manual: 1

Vertical sticker (Logo): 1

Vertical sticker (Operation panel): 1

USB ash drive cover: 1

USB ash drive cover screw: 1

Model Name / Serial No. label: 1
Indicates the model name and serial number.

Cover SHARP logo: 1
Place this sticker onto the SHARP logo to cover the logo.

Stand hole protection cover: 2
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
Contents
IMPORTANT INFORMATION ............................................3
DEAR SHARP CUSTOMER ..............................................4
SAFETY PRECAUTIONS ..................................................4
TIPS AND SAFETY INSTRUCTIONS ...............................7
MOUNTING PRECAUTIONS ............................................8
Supplied Components ..................................................... 9
Part Names .....................................................................10
Connecting Peripheral Equipment ...............................12
Connecting the Power Cord .........................................14
Binding Cables ............................................................... 14
Setting the USB ash drive cover ................................15
Afxing the Stand Hole Protection Covers .................15
Preparing the Remote Control Unit .............................. 16
Installing the batteries ................................................16
Remote control operation range .................................16
Turning Power On/Off .................................................... 17
Turning on the main power.........................................17
Turning power on/off ..................................................17
Basic Operation .............................................................19
Playing the Files in a USB Flash Drive ........................21
Auto playback ............................................................. 21
Playing les ................................................................21
Playing les using the SCHEDULE function ..............22
Operations during play ...............................................23
Settings ......................................................................23
Menu Items .....................................................................25
Displaying the menu screen ....................................... 25
Menu item details .......................................................26
Controlling the Monitor with a PC (RS-232C) .............. 32
PC connection ............................................................ 32
Communication conditions .........................................32
Communication procedure .........................................32
RS-232C command table ........................................... 36
Controlling the Monitor with a PC (LAN) .....................38
Settings to connect to a LAN ......................................38
Command-based control ............................................ 39
Troubleshooting .............................................................40
Specications ...............................................................42
Mounting Precautions
(For SHARP dealers and service engineers) ............... 48