Sharp PN-Y496 - Playing the Files in a Media; Auto Playback

22
E
You can play image, video, and audio les in media (USB
ash drive or SD memory card) that is connected to the
monitor.
For information on USB ash drive, see page 12.
For information on SD memory card, see page 13.
Caution
• A USB ash drive and SD memory card cannot be
connected simultaneously.
Auto playback
The image les or video les in a USB ash drive or an SD
memory card can be automatically played.
Create a folder with the name “autoplay” in the top level of the
USB ash drive or the SD memory card.
Files in the “autoplay” folder that meet the criteria below play
automatically. (Supported formats and le names are different
from other playback.)
Format
Image les
: *.jpg *
1
or
Video les : *.wmv *
1
File name
001.jpg - 030.jpg *
2
or
001.wmv - 030.wmv *
2
(Files are played by number in ascending
order. If a number is missing in the
sequence, that number is skipped.)
Number of les Up to 30.
*1 For details, see “Supported formats” (see page 26).
*2 File extension must be in lowercase.
Caution
• Mixed playback of image les and video les is not
possible. To display a mix of image les and video les, see
"SCHEDULE" (see page 33).
TIPS
• During auto play, it is better to turn the power ON/OFF using
the remote control unit. When the power is turned ON/OFF
using the main power switch, it takes a longer time until
auto play is started. It also takes a longer time for playback
to start from POWER SAVE MODE and ON.
• The displayed screen size is as follows:
Image: NORMAL
Video: Screen size of input mode before auto play*
* To have auto play always play at the same size, set the
screen size of each input mode to the same size.
n
Preparations
Set the type of les for auto play.
1. Change an input mode to other than [Media Player].
(See page 20.)
2. Press
MENU
and select SETUP with or .
3. Press
ENTER
and select AUTO PLAY with or .
4.
Press
ENTER
and select PHOTO or MOVIE with or .
5. Press
ENTER
.
6. Press
MENU
.
n
Auto playback of les
1. Connect a media to be played (the USB ash drive or
the SD memory card) (see pages 12,13) and turn the
power ON. You can connect a media to be played (the
USB ash drive or the SD memory card) (see pages
12,13) after turning the power ON.
TIPS
• Auto play will not start if a folder, le format, or le name
indicated in “Auto playback” is not correctly set, and if AUTO
PLAY is not correctly set in the SETUP menu.
n
To stop auto play
1. Press
INPUT
.
Playing the Files in a media