Need help?Do you have a question about the Sharp QW-DXA26F41A-EN and is the answer not in the manual?
General| Energy Efficiency Class | A |
|---|---|
| Noise Level | 49 dB |
| Type | Freestanding |
| Child lock | Yes |
| Programs | 6 |
| Delay start | Yes |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
Read instructions, check for damage, use caution with children and detergents.
Place machine in suitable, safe area, away from temperatures below 0°C, ensuring easy access and proper connections.
Recommend fitting filter for water inlet, note water temperature limits for different models, and use cold water preferred.
Use only the new supplied water inlet hose, run water through it before connecting, connect directly to tap, and check for leaks.
Lists and labels main dishwasher parts: worktop, baskets, spray arms, filters, control panel, dispensers.
Details dishwasher capacity, dimensions, weight, voltage, current, power, and water supply pressure.
Ensure specs match, remove packaging, set water softener, fill rinse aid before initial use.
Explains the importance of soft water for dishwasher performance and the need for special dishwasher salt to soften water.
Instructions on how to open the salt compartment, fill it with salt and water for first use, and refill after 20-30 cycles.
Provides a step-by-step guide on how to use a test strip to determine water hardness level.
A table correlating water hardness levels (German, French, British degrees) with display indicators (L1-L6).
Explains the dishwasher's water softener and advises checking water hardness via company or test strip.
Details the procedure to change the salt level (water hardness setting) via the control panel buttons.
Advise using specific detergents, storing safely, and adjusting amount based on program, load, and soil level.
Instructions on how to open the detergent dispenser, fill it, and close the lid securely before each program.
Guidance on using combined detergents, advising against them in short programs and recommending powder detergents instead.
Explains the function of rinse aid in drying dishes without streaks and stains, and the effects of incorrect usage.
Instructions for filling the rinse aid compartment and adjusting the rinse aid level setting via the control panel.
Guidelines for loading dishes: pre-rinsing, correct placement, no overloading, avoid spray arm obstruction.
Instructions on how to select a different program while the machine is running.
Steps to cancel a running program, including pausing, discharging water, and confirming cancellation.
Procedure to turn off the machine after the program has ended, including unplugging and turning off the water tap.
Detailed instructions on how to remove, clean, and reassemble the micro, coarse, and metal filters for the dishwasher.
Guidance on cleaning spray arms, ensuring holes are not clogged, and how to remove and refit the upper spray arm.
Explains how residues block pump and gives steps to clean it safely, including power disconnect and filter removal.
To Next Page