J
jvalentineAug 18, 2025
What to do if my Sharp Dishwasher is unable to discharge water?
- KkeithjonesAug 18, 2025
The water discharge hose and filters may be clogged. Cancel the program. If the error continues, contact for service.
What to do if my Sharp Dishwasher is unable to discharge water?
The water discharge hose and filters may be clogged. Cancel the program. If the error continues, contact for service.
What to do if my Sharp Dishwasher is overflowing?
Unplug the machine and close the tap. Contact for service.
What to do if detergent remains in the detergent compartment of my Sharp QW-GX13F47EI-DE Dishwasher?
This may happen if detergent was added when the detergent compartment was wet. Make sure detergent compartment is dry before use.
Why are there whitish stains on my Sharp Dishwasher dishes?
Whitish stains on dishes can occur due to several reasons. It could be that not enough detergent was used, so use the correct amount of detergent, as instructed in the programme table. The rinse aid dosage and/or water softener setting might be set too low, in this case increase rinse aid and/or water softener level. It is also possible that you have a high water hardness level, so increase water softener level and add salt. Finally, check that the salt compartment cap is closed properly.
Why don't my dishes dry in my Sharp QW-GX13F47EI-DE Dishwasher?
If your dishes aren't drying, it might be because a drying option isn't selected, so select a programme with a drying option. Another reason could be that the rinse aid dosage is set too low, so increase rinse aid dosage setting.
What to do if my Sharp QW-GX13F47EI-DE Dishwasher has insufficient water?
First, make sure the water inlet tap is open and water is flowing. Second, separate the inlet hose from the tap and clean the filter of the hose. If the error continues, contact for service.
Why does rust form on the dishes in my Sharp Dishwasher?
Rust stains can appear on dishes for several reasons. The stainless-steel quality of the dishes might be insufficient, so use only dishwasher-proof sets. There might be a high level of salt in wash water, so adjust the water hardness level using water hardness table. Check that the salt compartment cap is closed properly. Also, too much salt could have spilled in the Dishwasher while filling it with salt, so use a funnel while filling salt to the compartment to avoid spillage. Finally, a poor mains grounding can cause this, so consult a qualified electrician immediately.
What to do if my Sharp QW-GX13F47EI-DE Dishwasher keeps inputting water continuously?
Close the tap and contact for service.
What to do if my Sharp Dishwasher has a faulty heater?
Contact for service.
What to do if my Sharp QW-GX13F47EI-DE Dishwasher experiences overheating failure?
Contact for service.
Brand | Sharp |
---|---|
Model | QW-GX13F47EI-DE |
Category | Dishwasher |
Language | English |